LIGHTAILING Light Set For (Ghostbusters Ecto-1) Building Blocks Model - Led Light kit Compatible With Lego 21108(NOT Included The Model)

Product Information

Hide 2 cables from the lights on the left side of the car (looking from the front) up the left side by laying them in between the white studs and then reconnecting the grey triangular plates over the top of them. Take another flashing Bit light and install it to this section ensuring that the LED is laid over the white stud and secured down by reconnecting the red piece over the top. CAUTION: Forcing LEGO® to connect over a cable can result in damaging the cable and light. Connecting cable connectors to Expansion Boards Take the 2 groups of cables from the roof lights and loop them around so that we do not have too much excess cabling. Use some tape to tape the cables together to prevent them from unwinding. Continue to remove the following pieces which make up the windscreen, side windows, and grey triangular tiles from the sides of the car.

Take extra care when inserting connectors to ports of Expansion Boards. Connectors can be inserted only one way. With the expansion board facing up, look for the soldered “=” symbol on the left side of the port. The connector side with the wires exposed should be facing toward the soldered “=” symbol as you insert into the port. If a plug won’t fit easily into a port connector, do not force it. Before reconnecting the white Lego pieces which make up the front bonnet, ensure that the cables from the LEDs are laid in between the studs of the Lego plates underneath as per below example images. One 3-Voice Polyphonic Sound Chip with Ecto-1 Siren, Engine, Door, and Alarm Sound EffectsPre-Loaded It’s time to neaten up all the cabling from the LEDs we have installed so far. Take the 5 cables from the front lights and twist/wind them around each other starting from the base working your way up. They should all come together neatly.PLEASE NOTE: THIS IS ONLY LeLightGo LEGO LIGHTS. LEGO® SET IS NOT INCLUDED. ABOUT WARRANTY & SERVICE Before we hide the 2 cables from the right we will first install an LED to the blue light at the right side window. To do this, remove this section at the grey stud with clip. Take the cable from the LED we just installed and the 2 cables from the front right lights and hide them in between studs up the right side of the car by reconnecting the grey triangular plates over the top of them. Our light kits come with detailed, step-by-step installation guides to help you add lights to your favourite models. No electronics experience required! Connect multiple kits

Take 1 standard Bit Light (non flashing) and place it on top of the stud of the grey round plate ensuring the LED component part is facing the correct way up. Secure the LED in place by connecting the transparent Lego plate over the top.One of LEGO®'s most popular product lines can now be brought to life with our custom LED lighting system. Browse our catalogue of Star Wars designed light kits, which include Ultimate Collector Series (UCS) sets and LED lightsabers for minifigures! LEGO® Modular Building Series If there's something strange in your neighbourhood, who are you gonna call? Why the Ghostbusters of course! Take the front grey pole with attached lights and disassemble all the pieces as we will be replacing the grey pieces with new pieces (with different clips).