Also the low hanging light shield is a bit annoying sometimes as it hangs a bit too low and it often hits the magnets I use for holding down the material.

When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles.

New eye protection design: The laser protective cover perfectly protect your eyes,filter UV light for 95%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles. A:One year warranty (We will send you the corresponding non-artificially damaged parts for free). Q:WHICH ENGRAVING SOFTWARE IS SUPPORTED? Need to find a driver for Windows 10. There's a driver called CH340 that you want to Google and load and install the software called Lightburn. Once the software is installed settings and the driver loaded, you'll be able to connect the laser to the Lightburn software and start playing around with sample files including shapes and other templates.

INFRARED LASER (1064nm) Engineered for precision in both metal and plastic engraving, our technology excels across a wide spectrum of applications. Furthermore, it extends its capabilities to non-metallic materials like varnished wood furniture and ABS, showcasing its versatility and effectiveness. Vector images are much faster to engrave as the laser head directly follows the lines. You can not make a grayscale image though.You can get millions of free vector designs on the internet, or you can use free vector drawing programs like Inkscape or QCAD (for more technical drawings) A:Wood, plastic (opaque), cloth, leather, and other materials that can be burned by laser. Q:CAN I ENGRAVE METAL AND STAINLESS STEEL? Blue Laser Modules (455nm) Unparalleled cost-effectiveness makes it an ideal choice for a range of applications, including engraving and cutting various materials such as wood, acrylic, and metal. Upgraded high-performance fixed-focus laser: no need to adjust the focus before engraving;The focal spot area of the new laser is only 1/3 of the spot area of other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser.

Lightburn supports more formats: AI, SVG, DXF, PDF, HPGL, PLT, and RD for vector formats and PNG, JPEG, BMP, TIFF, TGA, and GIF for image formats.

From the results you can see that the lower the speed, the more charring occurs. Faster the seed, more passes are needed. There is a protective cover on the laser to protect the user's eyes and there is no need to wear additional protective glasses. At the same time prevent pets from scratching the laser spot Eye protection flame retardant filter panoramic glass: The flame retardant filter panoramic glass can filter 97% of ultraviolet light which is very good for your eyes. You and the people around you don't need to wear goggles and you can watch the laser engraving clearly. Reduce the cost of your goggles and the inconvenience of wearing goggles the glass is flame retardant and safer to use. We achieve this by progressively lowering the board by 3mm for each square, without refocusing the laser head. Upgraded high-performance fixed-focus laser: no need to adjust the focus before engraving; the new laser focal spot is 50% smaller than other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser.

The most importart part is again the interval scale. By scanning vertically and horizontally with different interval steps we can approximate the laser dot size. From the results we can see that the laser dot is a rectangular, approximately 0.1mm wide and 0.35mm high as with a bigger step, the lines are not touching any more. We can see that at higher speed there is more wobbling present (mechanical) but the speed shows to have no effect on brightness of the engraved pattern. Experts in laser technology, leads with first-to-market 5W to 40W laser engraving and cutting machines, continuously leads in developing innovative engraving and cutting solutions. Power is vaired from 10% to 100% in 10% increments and the speeds are 600, 1200, 1800 and 2400mm/min. They are a bit difficult to read under that smoke stains :) Fiber Laser Introducing the pioneering World's First 20W High Power 1064nm Pulsed Fiber Laser Engraver designed specifically for Frame Laser Engraving Machines. With remarkable precision, this technology effortlessly achieves a single-pass cut through 0.2mm aluminum and conducts multi-pass cuts on a 0.5mm brass sheet.New eye protection design: The laser protective cover perfectly protect your eyes,filter UV light for 97%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles. Emergency stop button: If there is an accident stop the machine at any time and the carving is safer. Carving materials: wood, bamboo, cardboard, plastic, leather, MDF, slate, lacquered metal, mirror stainless steel; The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser. The power scale test pattern shows how the machine engraves with different power levels at different speeds.